Comment débloquer un écoulement d'eau bouché?

Clogged drains are quite a common problem in homes, but fortunately there are several methods you can try in order to unclog them. Here are a few suggested methods: Hot water and dish soap: Pour boiling water down the clogged drains, and then add some dish soap. Sometimes grease and soap residues can cause blockages, and this combination can help dissolve the accumulated deposits. Drain pump: You can try using a special drain pump, also known as a "rubber ball". Place it over the drain and perform pumping movements to create a vacuum and push out the clogged elements. Plunger: If you have access to the drain (for example in the bathroom) and you are ready, you can try unscrewing and cleaning it with a plumber's snake or plunger. Be careful not to damage the pipes or worsen the situation. Baking soda and vinegar: Pour 1/2 cup of baking soda into the clogged pipe, and then pour 1/2 cup of vinegar. This combination will cause a chemical reaction that can help dissolve the deposits. Leave the mixture for a few hours or overnight, and then flush it with hot water. Salt and baking soda mixture: Mix 1/2 cup of salt and 1/2 cup of baking soda. Pour the mixture into the drain and pour hot water. This can help loosen and remove contaminants. Chemical drain cleaners: There are also special chemical drain cleaners available on the market. However, remember that some of them can be aggressive and have an impact on pipes and the environment, so use them with caution and according to the manufacturer's instructions. If none of the above methods work and the problem with clogged drains persists, it may be necessary to consult a professional plumber who will be able to perform a more detailed diagnosis and take appropriate repair actions.

If these drains are separate (different verticals), I would start by unscrewing and cleaning the traps, and at the same time, check the air vent for blockage. If all these drains are connected to one sewer pipe (vertical), it is possible that it has become blocked; a photo of the trap in the most convenient place and the "spring fun" would be useful. After unclogging, it would be necessary to use chemicals to complete the task. As for chemical methods, I recommend highly concentrated hydrogen peroxide (above 30%, known as perhydrol), or alternatively caustic soda - pour it into the sink and pour a large amount of boiling/hot water (preferably after cleaning the traps, of course). One must be careful, as there is a strong reaction with hot water and organic substances, and one can get burned. I do not recommend using a drain snake.

The first preparation you can make yourself at home is baking soda with vinegar. You need to pour a glass of baking soda into the drain, and then pour the same amount of vinegar. Make sure to cover the drain with a plug so that the mixture doesn't flow back.

It depends on the type of drain. If it's not covered - it's best to dismantle it from the bottom and push it from the top. If it's covered, there are different cleaning methods: vinegar, mole, etc., as well as a plumber's snake, which is a flexible wire that can be used to push through the pipes. In an apartment, a small snake usually suffices, but in a single-family home, I once used a 10-meter-long one and it almost went all the way - but it worked. Most often, the drain is clogged with various debris from the sink - simply remove them mechanically, and that is the simplest solution. We use chemicals rather when mechanical cleaning fails due to restricted access. Or when, for various reasons, we don't want to engage in mechanical cleaning.

You can try to unscrew the pipe under the sink and see what's in there or pour baking soda and pour hot water or use a plunger.

I always use baking soda with vinegar. We sprinkle a glass of baking soda and then pour a glass of vinegar. The tested recipe always works :)

Such a mole-repellent can be purchased abroad in Poland you pour sodium metal with boiling water.

To unclog a blocked drain, you can use several methods: 1. Use a drain cleaner liquid. You can buy ready-to-use drain cleaner liquid in a store or make it yourself by mixing vinegar and baking soda. Pour this liquid into the drain and leave it for about 15-30 minutes, then flush it with a large amount of hot water. 2. Use a mechanical tool to remove clogs. You can use a special plunger (also called a drain plunger), which should be placed on the drain and moved up and down several times, then flush with water. 3. Try using a disposable toothpick. You can use a regular kitchen toothpick, covering the drain around it with a wet cloth or rag. Then carefully insert the toothpick into the pipe and move it up and down to loosen the clog. After finishing, flush with water. 4. Make a mixture of baking soda, salt, and boiling water. Mix 1/2 cup of baking soda, 1/2 cup of salt, and pour it all into the drain. After a few minutes, pour boiling water over it. This mixture will help dissolve the clogs and unclog the drain. Remember that if the problem with clogged drain persists or if you are unsure how to solve it, you can always contact a plumber who will help with professional removal of the clog.

Purified water and vinegar. It works wonders.

The simplest way is to pour baking soda into the drain and then pour vinegar.

Hot water and citric acid. And if it doesn't help: Chemical agents for unclogging pipes.

It is known and obvious that water "collects" everything and you simply need to install a strainer or clean the trap.