SKODA ROOMSTER - front electric windows - no function

Check the motors of the mechanism that are responsible for raising and lowering the ledge.

Repairing a Skoda Roomster windshield that won't go down can involve several different causes, such as a faulty window motor, a failed switch, or a problem with the fuses. Here are the steps to follow to diagnose and fix this fault:

1. Check the fuses: Start by checking the fuses responsible for lowering the windows. If the fuse is blown, replace it with a new one of the correct amperage rating.
2. Check the switches: Make sure the power window switches are working properly. If the switch does not respond when pressed, it may need to be replaced.
3. Check electrical connections: Check that all electrical connections, especially around switches and window motors, are secure and free from corrosion or damage.
4. Check the window motors: If the fuses and switches are OK, the next step is to diagnose the problem with the window motors. To do this, you will need to remove the door trim to gain access to the window motor. Check that the motor is running by connecting it directly to the power supply (e.g. battery). If the motor does not run, it will need to be replaced.
5. Inspect the runner mechanism: If the motor is operating properly, check the window runner mechanism to make sure there are no damage or blockages preventing the window from lowering.
6. Consult a mechanic: If none of the above steps solve the problem, it is recommended that you consult an experienced mechanic who can further diagnose the fault and suggest further corrective action.

Remember that car electrical work can be dangerous if you are inexperienced in the field. Always exercise caution and consult a professional mechanic when in doubt.

Thank you

SKODA ROOMSTER - front electric windows - no function. If the power windows on the front Skoda Roomster have stopped working, the following may be the reasons: Damage to the window control buttons - check the control buttons extensively for damage or shock/malfunction. Window Motor Fault - If the buttons work fine but the windows still won't move, there may be a problem with the window motor. In this case, it may be necessary to replace the damaged motor. Corrosion or dirt in the electrical system - Corroded connectors or debris in the contacts can cause power windows to malfunction. It's a good idea to thoroughly clean these items and see if that solves the problem. In general, however, if power windows stop working, professional diagnosis and repair is required. It is recommended to use the services of an authorized Skoda car service or a workshop specializing in vehicle electricals.