Is there a way to unscrew the broken transport bolts of the washing machine?

Yes, you can unscrew it, but you will need the right tools for this, you need to pre-drill the screw that was left in the hole of a smaller diameter with a drill and use screw extractors.

You can also ream the screw with a drill of the same diameter, only in this case you will have to rethread the reamed hole.

The best way to remove a screw with a stripped thread is a screw extractor. It allows repair without the need for reaming and threading. This is due to the opposite direction of operation compared to standard screwdrivers. You can also try using a drill, you just need to drill a hole of the right size and then turn the drill on in the opposite direction.

If situations such as a screwed-off screw happen to you relatively often, it is worth getting a special set of extractors. They are dedicated to broken screws. Thanks to them, you don't have to worry about how to unscrew the screw damaging the thread. To use this type of extractor, drill the screw in its central part. Only then do we place the matching extractor. Its characteristic is that it has a left-hand thread, thanks to which there is no problem with unscrewing a broken screw. Of course, there are definitely more ways to get rid of a broken screw. However, the most important element of each of them is to skillfully ream the screw and then extract it. In a situation where we are not sure whether we will do it without any damage, it is better to leave this problem in the hands of a specialist.

If a broken bolt is partially jammed in the thread, you can try the following methods to remove it:

1.Use pliers or a socket wrench and try to loosen the bolt by using light force and turning it counterclockwise.

2.Use oil or metal grease to help loosen the screw.

3. Try using a plastic or wooden spatula to remove the screw from the thread.

4. You can use the services of a specialist who has the appropriate tools and skills to remove the broken screws.

If none of these methods work, you may need to remove the drum and remove the screw through the hole. In any case, it is best to consult a professional to avoid additional damage or problems with your washing machine.

You can still remove the back cover from the other side, maybe they stick out

The easiest way is to drill the screw with a smaller drill bit and use extractors. As my colleagues have written before.

Yes you can, If you know someone who can weld please ask him/her to tep something on top of the broken screw which you can use a player after the welding has cooled down to unscrew the screw. Then replace your screw with a new screw.

Yes, there are ways to unscrew broken shipping bolts of the washing machine: 1. Using a drill and drill: You can use a drill with a smaller diameter than the screw and drill to drill a hole in the bolt and then try to unscrew it. 2. Compressed air: You can try to remove any rust or dirt attached to the bolt with compressed air, then try to loosen it with a spanner. 3. Solvent: You can try applying solvent or penetrating oil to the screw to help loosen it. However, be careful not to let these substances get inside the washing machine. 4. Use of grippy tools: You can try to use grippy tools such as bolt pullers or special wrenches to remove broken bolts.