如果你不能翻译，或者语言不正确，请只返回源文本。

Removing prints from items depends on the type of material and the print itself. Here are a few general guidelines: 1. **Cotton clothing:** - Trying gentle rubbing with isopropyl alcohol or vinegar may help. - Also, try using a stain remover. 2. **Synthetic clothing:** - Use acetone on a small, inconspicuous area to test the material's reaction before using it on a larger surface. 3. **Flat surfaces (e.g. plastic, glass):** - Gentle rubbing with isopropyl alcohol may help. - Nail polish removers may be effective, but check if they will damage the surface. 4. **Wooden surfaces:** - Try gently wiping off the print with a cloth soaked in vegetable oil. It is important to always test the substance on an inconspicuous area to avoid damaging the material. If the print is difficult to remove, consider using the services of professionals, such as a clothing cleaning company.

"A lot depends on the printing technology and the substrate itself. If it is a flex/flock type film, it adheres to the surface under the influence of glue. If it is a technical fabric such as polyester, the print is often done through sublimation, where the design is created by dyeing the fibers. It can also be a direct digital print, screen transfer printing, or traditional screen printing, where the ink permanently penetrates the fabric fibers. In the case of glued iron-ons, washing at high temperatures and attempting mechanical separation can have an effect. In the case where the fibers are permanently dyed, removing the print may prove practically impossible."

Some may fade under the influence of washing at high temperatures, but this can damage the material. A good solution may be to apply a new one, in the color of the material.

Just dissolve a spoonful of soy sauce in a glass of warm water and rub the printed area with the resulting solution. Then gently remove the entire thing with a toothbrush or cotton pad.

"There are several ways to remove a print from an item without damaging the material. 1. Hot water method: - Fill a sink or bowl with hot water. - Gently rub the print using a sponge or soft brush. - Repeat this process until the print gradually starts to fade. 2. Use toothpaste: - Apply a small amount of plain toothpaste to the print. - Gently rub the print with a soft toothbrush. - Rinse the print with water and repeat if necessary. 3. Use methyl salicylate or isopropyl alcohol: - Lightly soak a sponge or soft cloth with methyl salicylate or isopropyl alcohol. - Pat the print gently, avoiding rubbing to prevent damage to the material. - Repeat this process until the print is removed. Remember to test the chosen method on an inconspicuous area of the material before removing the print, to ensure it does not cause any serious damage."

The translation of the text from Polish to English is: "These types of inscriptions come off during fitting. Try applying a paper towel and working on such an inscription."

The English translation of the text is as follows: "Ironing method: Place the item on a flat surface that can be comfortably ironed. Put a dry paper towel or fabric on the print. Gently iron the print at a low temperature. Repeat this process until the print starts to peel off. Chemical methods: Check the label and manufacturer's recommendations on the clothing before use. You can try using acetone or isopropyl alcohol. Soak a cotton pad or soft cloth in the chosen chemical. Gently rub the print until it starts to dissolve. Then wipe with a clean cloth to remove any remaining print. Specialized products for removing prints: There are special products available on the market for removing prints. Read the manufacturer's instructions before use and follow them. Apply the product to the print and wait according to the recommendations. Then wipe with a clean cloth to remove the print. Remember that before attempting to remove a print, it is always worth testing the chosen method on a small, inconspicuous part of the item to ensure that it does not cause any damage or fading to the fabric. If you are unsure of what chemicals or methods to use, it is always helpful to consult a professional or dry cleaner who can assist in removing the print from your item."

Removing a print from clothing depends on the type of print and the material the clothing is made of. Here are a few general guidelines, but remember to test any method of removing a print on a small, inconspicuous part of the clothing before proceeding to ensure it does not damage the material. 1. Removing Heat Transfer Prints: - Iron the clothing on high heat for a few minutes. This often softens the print enough to be removed. - Gently fold the clothing and try to peel off the print with your fingers or a massage knife. - If that doesn't work, try using a hot iron and a piece of ironing paper. Place the paper on the print and press for a few seconds. 2. Removing Plastisol Prints: - Try using acetone, but first test it on a small area to make sure it doesn't damage the fabric. - Dampen a clean cloth with acetone and gently rub the area with the print. - Be careful not to spread the print to other parts of the clothing. 3. Removing Sublimation Prints: - Sublimation prints are harder to remove because the dyes transfer into the fiber structures of the fabric. - Try using acetone or specialized stain removers. - Remember to read and follow the instructions on the clothing label before attempting to remove the print. 4. Other General Tips: - Freezing the clothing is also a commonly used method. Place the clothing in the freezer and then try to scrape off the print with a knife or the edge of a credit card. - Always read the labels on clothing, as some materials do not tolerate certain chemicals. If you are unsure, consult a professional cleaner or clothing expert for personalized advice. Some methods may work better depending on the specific type of print and fabric of the clothing, so it is important to be cautious and start with less invasive methods.

Hot water: Try soaking the area with the print in hot water for about 15-20 minutes, then gently rub the fabric using a soft brush, such as a toothbrush. Heat can help loosen the pressed layer. Steam: Use a steamer to saturate the printed area with steam. Then gently try to scrape or rub off the print. Acetone: Carefully test if acetone can dissolve the print on a small area. Acetone can be used on certain types of fabrics, but always test it first on a small, inconspicuous part of the material. Isopropyl alcohol: Like acetone, isopropyl alcohol can be used to remove some prints. Again, test it on a small area before using it on the entire item. Toothpaste with milk: Apply a small amount of toothpaste to the print, then try gently rubbing it with a damp cloth or sponge. After applying, rinse the fabric.