Можно ли подключить жесткий диск SATA к слоту PCI 1x, используя разъем riser, так же, как видеокарту?

Unfortunately, it is not possible to connect a SATA drive to a PCI 1x slot. The PCI 1x slot is dedicated to expansion cards such as sound, network or USB cards. To connect a SATA drive, we need a special connector that is located on the motherboard or on the SATA controller card.

I'm thinking, damn, there are these usb drive pockets, right? that the usb drive connects to the computer, and if this usb is connected to this adapter usb riser to PCIe 2.0 x1 and to the motherboard?

It is not possible to directly connect a SATA drive to a PCI-Express 1x slot using a riser designed for a graphics card. The reason is that the PCI-Express interface used for graphics cards is not the same as the interface used for SATA drives.

However, there are PCI-Express SATA controller cards that can be installed in a PCI-Express 1x slot and provide additional SATA ports for connecting SATA drives. These cards typically have multiple SATA ports and can support multiple drives.

To connect a SATA drive to a PCI-Express 1x slot, you would need to install a PCI-Express SATA controller card in one of the available PCI-Express 1x slots on your motherboard. Once the card is installed, you can connect the SATA drive to one of the SATA ports on the card.

It's important to note that the performance of the SATA drive connected to a PCI-Express SATA controller card may be lower than if it were connected directly to the motherboard's built-in SATA controller. This is because the PCI-Express 1x interface has less bandwidth than the SATA interface, so data transfer speeds may be slower.

PCI-e drives are and will always be faster than SATA. They will also become more and more common (Intel already has such plans). I'm not going to change the disc anytime soon, so this one better be able to handle them

Risers are designed specifically for connecting graphics cards that require adequate power and signals, and hard drives require a different configuration.

No, it is not possible to connect a SATA drive directly to a PCI-Express 1x slot, even with a riser. PCI-Express 1x slots do not have enough pins and features to support SATA hard drives.

To connect a SATA drive, you usually need a special SATA controller or expansion card that can be plugged into a PCI-Express x1 slot or higher. You can also use an external interface such as USB or eSATA to connect the drive to your computer.

In any case, before connecting new devices, make sure that they are compatible with the given computer or server and that they have the appropriate connectors and drivers.

It is not possible to directly connect a SATA drive to a PCI-e 1x slot using a riser, as these are two different interfaces that are not compatible with each other. However, there is a solution that can help in this situation.

You can use the expansion SATA controller, which is designed to connect SATA hard drives to PCI-e connectors. Instead of using a riser with a PCI-e 1x port, you will need a SATA-PCI-e controller, which allows you to connect SATA drives directly to the PCI-e connector on your motherboard. Please note that these controllers may have different numbers of SATA ports and different PCI-e interfaces (1x, 4x, 8x, 16x), so please check compatibility before purchasing.

Here are the steps to connect a SATA drive to a PCI-e 1x connector using a SATA-PCI-e controller:

1. Turn off the computer and disconnect it from the power supply.
2. Open your computer case and locate a free PCI-e 1x slot on the motherboard.
3. Insert the SATA-PCI-e controller into the PCI-e 1x connector on the motherboard. Make sure it is well seated and secured.
4. Connect the SATA hard drive to the SATA-PCI-e controller using a SATA cable.
5. Connect power to the hard drive using the computer's power supply.
6. Close the computer case and connect it to the power supply.
7. Turn on the computer and check if the hard drive is detected in the BIOS/UEFI and in the operating system.

This solution will allow you to use free PCI-e 1x connectors to connect additional SATA drives. However, it is worth noting that SATA-PCI-e controllers may introduce additional latency compared to directly connecting the drive to the SATA connector on the motherboard, which may affect the performance of the drives. Therefore, you should choose a good quality controller to minimize possible performance issues.

Thank you.